Dual Motor Driver Module 1A TB6612FNG For Arduino Microcontroller
Description:
- The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
- Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW- CCW- short-brake- and stop.
- The two motor outputs (A and B) can be separately controlled- the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz..
- The STBY pin should be pulled high to take the motor out of standby mode.
- Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC- while the motor supply (VM) is limited to a maximum voltage of 15VDC.
- The output current is rated up to 1.2A per channel (or up to 3.2A for a short- single pulse).
- Decoupling capacitors are included on both supply lines.
- All pins of the TB6612FNG are broken out to two 0.1 inch pitch headers.
- The pins are arranged such that input pins are on one side and output pins are on the other.
Reviews
There are no reviews yet.